国产激情久久久久久熟女老人-欧美午夜特黄aaaaaa片-夜夜偷天天爽夜夜爱-狠狠色丁香五月综合婷婷-国产女人高潮视频在线观看

DEARTO-Professional manufacturer of temperature and humidity measuring instruments
Tai'an Detu Automation Instrument Co., Ltd.

0538-5089056

Solution Current position:Home > Solution

How to Choose a Suitable Temperature and Humidity Calibration Chamber

Release time:2022-12-26    This article is read 4019 Times

The temperature and humidity calibration chamber, also known as the temperature and humidity standard chamber, is a professional measuring instrument commonly used in laboratory and industrial measurement. The temperature and humidity calibration chamber can provide a uniform and constant temperature and humidity environment for the object to be tested. With the standard device, the temperature and humidity measurement work can be carried out. So how to choose a suitable temperature and humidity calibration chamber? Here I will specifically explain how to choose a temperature and humidity calibration chamber from several aspects such as volume, temperature, humidity and control methods.

temperature and humidity calibration chamber

1. Capacity selection

Put the product to be tested (thermometer, temperature and humidity sensor, etc.) Follow the point.

1.1 The volume of the test product shall not exceed (20~35)% (recommended 20%) of the effective working space of the laboratory.

1.2 The proportion of the windward area of the test product to the total area of the laboratory working room should not exceed (35-50)% (35% is recommended).

1.3 The distance between the outer contour of the test product and the inner wall of the calibration chamber is at least 100~150mm, (150mm is recommended).

 

The main reason for this regulation is that the test piece is placed in a crowded channel in the box. The narrowing of the channel will lead to an increase in air flow, which will affect the uniformity of the environmental parameters in the calibration chamber and occupy more space. The more serious the impact.

According to the principle of heat conduction, the temperature of the airflow around the inner wall of the calibration chamber generally differs from the center of the flow field by 0.5℃ to 1℃, and the high or low temperature can even reach 2C. The greater the difference between the experimental temperature and the external atmospheric environment, the greater the above-mentioned temperature difference. Therefore, the space within the distance (100-150 mm) from the inner wall of the cavity is an unusable space. The test data shows that the temperature difference between the windward side and the leeward side of the flow field can reach 1℃ to 3℃, and in severe cases it can reach more than 4℃. Therefore, it is necessary to meet the two requirements of 1.1 and 1.2 as much as possible to ensure the consistency of the surrounding environment parameters of the tested product.

For example, the relevant standards for temperature-related tests include that the air flow around the calibration chamber should not exceed 1.7m/s, so as to avoid the unrealistic feeling of the test product and the surrounding environment. Spread the heat. If the test product volume or windward cross-sectional area is not limited, the actual test airflow velocity will increase to exceed the maximum wind velocity of the test standard, and the validity of the test results will be questioned.

2. Selection of temperature range

At present, the range of temperature test chambers is generally -20℃~65℃, and the low temperature of some test equipment can reach -30℃, and the high temperature can reach 65℃ or even 70℃. For -30℃~65℃, unless there are special needs, such as the installation location is close to the heat source outside the commodity such as the engine, it can meet the temperature detection requirements of most military and civilian products. Don't blindly raise the upper temperature limit.

The higher the upper temperature limit, the greater the temperature difference between the inside and outside of the chamber, the worse the uniformity of the flow field in the chamber, and the smaller the available working volume. On the other hand, the larger the upper limit temperature value, the higher the cost of the production box, because the higher the temperature, the higher the heat resistance requirements for heat insulating materials (such as glass wool, etc.).

3. Selection of humidity range

The humidity index given by the temperature and humidity calibration chamber is mostly 10%~90% or 5%~95%. If the temperature and humidity calibration chamber has no dehumidification system, the calibration chamber with a humidity range of 60%~95% can only perform high humidity tests.

The high temperature experiment adopts the liquid bath constant temperature and other plate heating technology. This technology is Dearto's patented technology. The design of the lower chamber is equivalent to a precision constant temperature tank. After controlling the liquid medium in the constant calibration bath to the target temperature, it circulates around the measurement chamber. so the entire measuring chamber is almost immersed in the liquid, this principle ensures a uniform and stable temperature.

The humidity generation principle of the shunt method is used to optimize and improve the humidity, and the ultrasonic atomization and ultra-low temperature condensation drying technology can ensure the rapid stability of the calibration chamber.

4. Choice of control mode

There are two types of temperature and humidity calibration chamberes: conventional temperature and humidity calibration chamberes and high-precision temperature boxes.

Under normal circumstances, the conventional temperature and humidity calibration chamber generally refers to a constant temperature and humidity calibration chamber. The control method is: after setting the target temperature and humidity, the calibration chamber has the ability to automatically maintain the temperature to the target temperature point.

The high-precision thermostatic chamber is a specially designed constant thermostatic chamber with air as the heat transfer medium, which has the technical characteristics of high temperature control accuracy, good temperature field uniformity, and small fluctuation. There are many temperature measuring instruments that cannot touch the liquid constant temperature source, so they are not suitable for calibration in the constant calibration bath. The emergence of high-precision thermostatic chamber solves the calibration problems of some types of instruments, and realizes the blank of the constant temperature source. A complete solution is provided.

5. Fluctuations in temperature and humidity

In order to more accurately simulate the actual environmental conditions encountered by the product in nature, it is necessary to ensure that the product under test is in the same temperature environment during the calibration.For this reason, the temperature gradient and temperature fluctuation chamber in the test must be limited. Temperature fluctuation is a parameter that is relatively easy to achieve, and the actual temperature fluctuation in the test chambers produced by most manufacturers is within the range of ±0.01℃.

The relative humidity deviation in the temperature and humidity calibration chamber should be -0.5%~+1%. In order to meet the humidity control accuracy requirements, the temperature control accuracy requirements in the test chamber are very high, and the temperature fluctuation is generally less than ±0.01℃, otherwise it is difficult to meet the humidity control accuracy requirements.

How to Choose a Suitable Temperature and Humidity Calibration Chamber
  • Online message

  • Your name
    Your title must be filled
  • Cellphone number
    Mobile phone number is required
  • whatsapp/wechat
    Optional
  • Type of consultation
    Required, please select the type of consultation
  • Consultation content
    Required, what is the content you want to consult?
  • Verification code: Please fill in the calculation result.
Previous:Surface Sensor Calibrator Pricesnext:What can DTHTH high temperature & high humidity calibration chamber be used to do?

Contact us

DEARTO QR codeHeadquarter Address Tai'an High-tech Development Zone,  Shandong Province 
Telephon :+86 0538-5089056  +86 13953856217 
Fax : +86 0538-5059718 
After sale:+86 0538-5050959
Website : www.tadt.com.cn 
E-mail   :  tadtzdh@dearto.cn

Copyright? Tai'an Detu Automation Instrument Co., Ltd.             Lu ICP 14024757-1           Business license inquiry

主站蜘蛛池模板: 亚洲性色av一区二区三区| 亚洲乱码一二三四区| 国产在线无遮挡免费观看| 日本疯狂爆乳xxxx| 久久久久久久综合综合狠狠| 国产精品无码av天天爽| 亚洲在av极品无码| 国产精品熟女人妻| 欧美性欧美巨大黑白大战| 免费无码黄真人影片在线| 巨大巨粗巨长 黑人长吊| 国产激情无码一区二区app| 996热re视频精品视频这里| 99国精品午夜福利视频不卡| 色8激情欧美成人久久综合电影| 色婷婷亚洲一区二区三区| 97精品伊人久久久大香线蕉| 色老久久精品偷偷鲁| av大片在线无码永久免费网址| 欧美成人看片黄a免费看| 国产在线乱码一区二三区| 极品美女扒开粉嫩小泬图片| 午夜福利国产成人a∨在线观看| 一区二区三区av波多野结衣 | 国产精品青青青高清在线| 久久不见久久见www电影免费| 国产极品粉嫩福利姬萌白酱| 2020年国产精品| 小12萝裸体自慰出白浆| 欧美日本亚洲韩国一区| 伊人久久一区二区三区无码| 国产剧情无码播放在线观看| 玩弄少妇人妻| 呻吟国产av久久一区二区| 天天躁日日躁狠狠躁av麻豆男男 | 精品国产精品三级精品av网址| 国产无遮挡无码视频免费软件| 精品国产aⅴ无码一区二区| 无码熟熟妇丰满人妻porn| 久久久精品久久日韩一区综合| 国产在线精品视频免费观看|